1. Home
  2. About Us
  3. Wood Plastic Composite Board Installation
Wood Plastic Composite Board Installation
Wood-Plastic Decking

Installation Instructions
Step 1. Use the plastic expansion pipe to fix the joist on the ground

  • Pre-drill nail holes on the joist
  • Put plastic expansion pipe into the holes
  • Fasten the screws

Step 2. Fix the boards on the joist

  • Stainless buckles-1 Installation
  • Plastic buckles Installation
  • Aluminum buckles installation

Remarks

  • Always leave space (5 -7mm ) between 2 boards, or between the board and wall.
  • The gap between plastic expansion pipe is around 500 mm.
  • Where there are 2 board ends meet, put 2 pcs of joists(the space between 2 joists is at least3-4mm) under each board end.
  • Be sure that the installation surface is level. Keep the space between 2 joists at 250-300 mm.
  • As wood-plastic material itself is high in density, you must pre-drill nail holes in the moldings before using self-tapping screws.
  • The length is optimal when shorter than 2.2m. The length is longer than 2.2m, please leave suitable space according to WPC shrinkage
  • Wood-plastic decking should be fixed directly on the joist with self-tapping screws at the start and end position. The head of self-tapping need to flush with surface of wood flooring.
  • The thickness of the cement when hardened is 100mm minimum. And the cement hardened must be total large area not small tiles.
  • The ground should be well ventilated and drained before installing WPC decking panels.
  • It is advised to wash the WPC profiles every 3-4 days within the first month after installation. The surface of WPC profiles will become stained if dirt is left on them before the first light rain.
  • Running bound patters are structurally superior to straight installation patterns.
  • The color will fade a bit within 4-6 month after installation. Then they will remain stable.

Joists for WPC decking

  • Model:K30-55
  • Model:K30-60
  • Model:Y20-40
  • Model:B32-57

Main accessories

  • Stainless Steel Buckle
  • Plastic Buckle
  • Seamless Buckle
  • Aluminum Buckle
  • Stainless Self-drilling Screws
  • Plastic expansion pipe

Tips for Removing Stains

The types of stains Solution
Dust and dirt Use a hard brush dipped in warm soapy water to remove it.
Mildew Scrub with ordinary wood mold class agents, or bleach to rinse or wipe it directly.
Chalk stains In addition to white chalk, other colors cannot be removed once printed, you can use bleaching agents with hot soapy water to clean it.
Ice or snow Apply calcium chloride or rock salt, it can melt ice or snow. Then you can use hot soapy water to wash it.
Stain,soil and dirts Apply detergent, which contains oxalic acid or phosphoric acid. Wipe the stain for 10-15 minutes.
Greasy and Oil-based Stains Immediately use household cleaning products with hot soapy water to wash it.
Juice and wine stains Mix the bleach stain agents and hot soapy water to dilute the stain and then wipe the stain.
Ink stains Ink stains may be difficult to remove. Mix bleach stains agents and hot soapy water to dilute the stain.

Decking's Edge Banding

  • L50-50,B12-72-2 B9-90 and B10-140 can be used for edge banding of decking. According to the height of the keel, you can cut them to the desired height. The self-tapping screws are used for fixing the edge with intervals of 400 mm - 600 mm. You can also use other metal edge article of a wood floor.
  • Please avoid heavy impact or collision during use, In the process of material storage, transportation and installation, please properly handled it to prevent falling from a height.
Wood-Plastic Guardrail

Installation Instructions
1. Fix the column

Directly embled columns in advance to a depth of not less than 200 mm and then pouring them with concrete (Before pouring them, it is better to use steel bar to cross the embled parts.)
Make rust-proof steel sockets as illustrated. Use expansion bolts to fasten the sockets into the ground. The height of square steel should be longer than half of a WPC square column. Then using screw to fix he column and inner steel bar. Hardening treatment on the ground is necessary.

2. Assembling WPC guardrail

Using inner connector to fix cross beam and fencing panel
Using outer connector to fix the cross beam and post

Methods of connection beam and column

A: Linked by inner connector
B: Linked by L corner link
C: Linked by cutting holes
D: linked by outer connector

  • Fixed the second column
  • Fixed the second column
  • WPC caps installation
  • WPC caps installation

WPC guardrail installation Strategy

  • As wood-plastic material itself is high in density, you must pre-drill nail holes in the moldings place before using self-tapping screws, and then fasten self-tapping screwing.
  • Considering a better safety performance. if the span length exceed 1meter, it is possible to insert square steel
  • Each span length in the guardrail should not exceed 1.5 meter.
  • Linked by cutting holes,the post width must exceed 30mm longer than cross beam width .The deep of cutting is at half of post width. And then fix them fasten.
  • The space between two profiles is at 2mm. If the profiles is longer than 1.5m, please leave a suitable space according to wpc Shrinkage
  • Please avoid heavy impact or collision during use, In the process of material storage, transportation and installation, please properly handled it to prevent falling from a height.
The types of stains Solution
Dust and dirt Use a hard brush dipped in warm soapy water to remove it.
Mildew Scrub with ordinary wood mold class agents, or bleach to rinse or wipe it directly.
Chalk stains In addition to the white chalk, other colors can not be removed once the printing, you can use bleaching agent with hop soapy water to scratch it.
Ice or snow Apply calcium chloride or rock salt, it can melt ice or snow. Then you can use hot soapy water to wash it.
Stain,soil and dirts Apply detergent, which contains oxalic acid or phosphoric acid. Wiping the stain for 10-15 minutes, you can remove stains.
Greasy and Oil-based Stains Once a greasy stain, please immediately use household cleaning products with hot soapy water to wash it.
Juice and wine stains Mix the bleach stains agents and hot soapy water to dilute the stain and then wipe the stain.
Ink stains Ink stains may not be removed. Mix bleach stains agents and hot soapy water to dilute the stain.